0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Todd A. Helwig

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Frank, Karl H. / Samaras, Vasilis / Helwig, Todd A. (2012): The Effect of Piece Marking Upon Fatigue Performance of Bridge Steel. In: Engineering Journal, v. 49, n. 2 (Juni 2012).

    https://doi.org/10.62913/engj.v49i2.1023

  2. Denavit, Mark D. / Jacobs, William P. / Helwig, Todd A. (2020): Continuous Bracing Requirements for Constrained-Axis Torsional Buckling. In: Engineering Journal, v. 57, n. 1 (März 2020).

    https://doi.org/10.62913/engj.v57i1.1158

  3. Frank, Karl H. / Helwig, Todd A. (1995): Buckling of Webs in Unsymmetric Plate Girders. In: Engineering Journal, v. 32, n. 2 (Juni 1995).

    https://doi.org/10.62913/engj.v32i2.643

  4. Park, Sangwook / Clayton, Patricia / Engelhardt, Michael D. / Helwig, Todd A. / Williamson, Eric B. (2024): Cyclic Response of Composite Steel Gravity Framing Connections in Multibay System-Level Tests. In: Journal of Structural Engineering (ASCE), v. 150, n. 3 (März 2024).

    https://doi.org/10.1061/jsendh.steng-12998

  5. Reichenbach, Matthew C. / Battistini, Anthony D. / Donahue, Sean / Helwig, Todd A. / Engelhardt, Michael D. / Frank, Karl H. (2023): Experimental Fatigue Evaluation of Typical Cross-Frame Details in Steel I-Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 28, n. 12 (Dezember 2023).

    https://doi.org/10.1061/jbenf2.beeng-6402

  6. Liang, Chen / Reichenbach, Matthew C. / Helwig, Todd A. / Engelhardt, Michael D. / Yura, Joseph A. (2022): Effects of Shear on the Elastic Lateral Torsional Buckling of Doubly Symmetric I-Beams. In: Journal of Structural Engineering (ASCE), v. 148, n. 3 (März 2022).

    https://doi.org/10.1061/(asce)st.1943-541x.0003294

  7. Yura, Joseph A. / Helwig, Todd A. (2021): Continuous Bracing Systems for Columns and Beams. In: Journal of Structural Engineering (ASCE), v. 147, n. 6 (Juni 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0003035

  8. Helwig, Todd A. (2005): New Directions for Stability Bracing of Steel Bridge Girders. Vorgetragen bei: 2005 Structures Congress: Metropolis and Beyond & 2005 Forensic Engineering Symposium, New York (New York), USA, 20-24 April 2005.

    https://doi.org/10.1061/40753(171)33

  9. Reichenbach, Matthew C. / Liu, Yangqing / Helwig, Todd A. / Engelhardt, Michael D. (2020): Lateral-Torsional Buckling of Singly Symmetric I-Girders with Stepped Flanges. In: Journal of Structural Engineering (ASCE), v. 146, n. 10 (Oktober 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002780

  10. Han, Liwei / Helwig, Todd A. (2020): Elastic Global Lateral-Torsional Buckling of Straight I-Shaped Girder Systems. In: Journal of Structural Engineering (ASCE), v. 146, n. 4 (April 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002586

  11. Han, Liwei / Belivanis, Konstantinos V. / Helwig, Todd A. / Tassoulas, John L. / Engelhardt, Michael D. / Williamson, Eric B. (2019): Field and computational investigation of elastomeric bearings in high-demand steel girder application. In: Journal of Constructional Steel Research, v. 162 (November 2019).

    https://doi.org/10.1016/j.jcsr.2019.105758

  12. Gull, Jawad H. / Azizinamini, Atorod / Helwig, Todd A. (2017): Comparison of detailing methods for straight skewed steel I-girder bridges. In: Journal of Constructional Steel Research, v. 136 (September 2017).

    https://doi.org/10.1016/j.jcsr.2017.05.003

  13. Fasl, Jeremiah D. / Stith, Jason C. / Helwig, Todd A. / Schuh, Andrew / Farris, Jamie / Engelhardt, Michael D. / Williamson, Eric B. / Frank, Karl H. (2015): Instrumentation of a Horizontally Curved Steel I-Girder Bridge during Construction. In: Journal of Structural Engineering (ASCE), v. 141, n. 1 (Januar 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001110

  14. Helwig, Todd A. / Yura, Joseph A. (1999): Torsional Bracing of Columns. In: Journal of Structural Engineering (ASCE), v. 125, n. 5 (Mai 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:5(547)

  15. Fan, Zhanfei / Helwig, Todd A. (1999): Behavior of Steel Box Girders with Top Flange Bracing. In: Journal of Structural Engineering (ASCE), v. 125, n. 8 (August 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:8(829)

  16. Helwig, Todd A. / Frank, Karl H. (1999): Stiffness Requirements for Diaphragm Bracing of Beams. In: Journal of Structural Engineering (ASCE), v. 125, n. 11 (November 1999).

    https://doi.org/10.1061/(asce)0733-9445(1999)125:11(1249)

  17. Yousefpour, Hossein / Helwig, Todd A. / Bayrak, Oguzhan (2015): Construction stresses in the world's first precast concrete network arch bridge. In: PCI Journal, v. 60, n. 5 (September 2015).

    https://doi.org/10.15554/pcij.09012015.30.47

  18. Battistini, Anthony D. / Wang, Weihua / Helwig, Todd A. / Engelhardt, Mike D. / Frank, Karl H. (2016): Stiffness Behavior of Cross Frames in Steel Bridge Systems. In: Journal of Bridge Engineering (ASCE), v. 21, n. 6 (Juni 2016).

    https://doi.org/10.1061/(asce)be.1943-5592.0000883

  19. Egilmez, O. Ozgur / Helwig, Todd A. / Herman, Reagan (2012): Buckling Behavior of Steel Bridge I-Girders Braced by Permanent Metal Deck Forms. In: Journal of Bridge Engineering (ASCE), v. 17, n. 4 (Juli 2012).

    https://doi.org/10.1061/(asce)be.1943-5592.0000276

  20. Wang, Liqun / Helwig, Todd A. (2008): Stability Bracing Requirements for Steel Bridge Girders with Skewed Supports. In: Journal of Bridge Engineering (ASCE), v. 13, n. 2 (März 2008).

    https://doi.org/10.1061/(asce)1084-0702(2008)13:2(149)

  21. Fan, Zhanfei "Tom" / Helwig, Todd A. (2002): Distortional Loads and Brace Forces in Steel Box Girders. In: Journal of Structural Engineering (ASCE), v. 128, n. 6 (Juni 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:6(710)

  22. Helwig, Todd A. / Frank, Karl H. / Yura, Joseph A. (1997): Lateral-Torsional Buckling of Singly Symmetric I-Beams. In: Journal of Structural Engineering (ASCE), v. 123, n. 9 (September 1997).

    https://doi.org/10.1061/(asce)0733-9445(1997)123:9(1172)

  23. Stith, Jason C. / Helwig, Todd A. / Williamson, Eric B. / Frank, Karl H. / Engelhardt, Michael D. / Schuh, Andrew C. / Farris, Jamie F. (2012): Comparisons of the Computed and Measured Behavior of Curved Steel I-Girders during Lifting. In: Journal of Structural Engineering (ASCE), v. 138, n. 1 (Januar 2012).

    https://doi.org/10.1061/(asce)st.1943-541x.0000417

  24. Helwig, Todd A. / Yura, Joseph A. (2008): Shear Diaphragm Bracing of Beams. II: Design Requirements. In: Journal of Structural Engineering (ASCE), v. 134, n. 3 (März 2008).

    https://doi.org/10.1061/(asce)0733-9445(2008)134:3(357)

  25. Helwig, Todd A. / Yura, Joseph A. (2008): Shear Diaphragm Bracing of Beams. I: Stiffness and Strength Behavior. In: Journal of Structural Engineering (ASCE), v. 134, n. 3 (März 2008).

    https://doi.org/10.1061/(asce)0733-9445(2008)134:3(348)

  26. Egilmez, O. Ozgur / Herman, Reagan S. / Helwig, Todd A. (2009): Lateral Stiffness of Steel Bridge I-Girders Braced by Metal Deck Forms. In: Journal of Bridge Engineering (ASCE), v. 14, n. 1 (Januar 2009).

    https://doi.org/10.1061/(asce)1084-0702(2009)14:1(17)

  27. Wang, Liqun / Helwig, Todd A. (2005): Critical Imperfections for Beam Bracing Systems. In: Journal of Structural Engineering (ASCE), v. 131, n. 6 (Juni 2005).

    https://doi.org/10.1061/(asce)0733-9445(2005)131:6(933)

  28. Stith, Jason C. / Helwig, Todd A. / Williamson, Eric B. / Frank, Karl H. / Engelhardt, Michael D. / Schuh, Andrew C. / Farris, Jamie F. / Petruzzi, Brian J. (2013): Behavior of Horizontally Curved I-Girders during Lifting. In: Journal of Structural Engineering (ASCE), v. 139, n. 4 (April 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000674

  29. Egilmez, O. Ozgur / Helwig, Todd A. / Jetann, Charles A. / Lowery, Richard (2007): Stiffness and Strength of Metal Bridge Deck Forms. In: Journal of Bridge Engineering (ASCE), v. 12, n. 4 (Juli 2007).

    https://doi.org/10.1061/(asce)1084-0702(2007)12:4(429)

  30. Yousefpour, Hossein / Gallardo, Jose M. / Helwig, Todd A. / Bayrak, Oguzhan (2017): Innovative precast, prestressed concrete network arches: Elastic response during construction. In: Structural Concrete, v. 18, n. 5 (Oktober 2017).

    https://doi.org/10.1002/suco.201600176

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine